Fieldrive
Driver for WorldFIP FIP network, version SSSB231 (Rohs). This product is no longer available for sale. It is replaced by the FIPDrive
Chips FIP
There are 11 products.
FieldTR 31.25 kb
Transformer for FIP WorldFIP network
FieldTR 1 s
Transformer for FIP WordFIP network
FieldTR 2.5 Mbits
Transformer for FIP WorldFIP network 2.5 Mbits and 5 Mbits
FullFIP2
Communication processor for FIP WorldFIP network. Product no longer available. Replace per PowerFIP-CC84
Fieldual
The FIELDUAL component is designed to operate in a medium redundancy fieldbus environment. Fieldual features are integrated into VHDL in our components for FIP cards. This product is no longer available.
MicroFIP - NanoFIP
MicroFIP asic component for WorldFIP protocol (no longer available ) - Remplaced by PowerFIP component ( MicroFIP functions are included in PowerFIP-CC84)
FIPDrive (ex Fieldrive)
€48.00
In Stock
FIPDrive is a FIP/WorldFIP driver (equivalent to Fieldrive). FIPDRive is welded onto the PCB footprint of the Fieldrive PLCC28. -40°C + 100 °C . Please fill the form to receive update about this product.
PowerFIP-CC84 (eq. FullFIP2)
FIP/WorldFIP chip integrating the functions of the FIP protocol, master/slave, variables, messaging. Replace FullFIP2. For rapid integration on a motherboard or host card and fast time-to-market. Communication via 16-bit bus and microcontroler STM32. LCC PCB size 84 (30*30mm, 1.27 mm pin pitch). PowerFIP source code is available under conditions.
PowerFIP-CC84 Dev Board
Development board using the PowerFIP-CC84 chip, to establish FIP/WorldFIP master/slave communication, via a 16-bit bus and STM32.
Associated with the Nucleo-H755ZI-Q card and its extension cards (I/O cards, etc.), the PowerFIP-CC84 Dev-Board becomes an operational FIP station to quickly validate a proof of concept at lower costs.
Register on the site to be informed!
IP-Module PowerFIP Crypto608
IP-Module to fully use the FIP/WorldFIP functionalities of the PowerFIP-CC84 co-processor.